{"product_id":"split-ac-complete-cleaning-and-protection-kit","title":"Split AC Complete Cleaning \u0026 Protection Kit","description":"\u003cp\u003eA coordinated cleaning and room-protection set for qualified technicians servicing compatible wall-mounted split air conditioners, covering masking, runoff collection, tools and dry storage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfiguration under review.\u003c\/strong\u003e These are proposed contents, not a confirmed packed set. Final contents, fit, sizes and price will be confirmed before orders open. No cleaning chemicals are included.\u003c\/p\u003e\u003ch2\u003eProposed complete kit contents\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Correctly sized reusable AC wash cover\u003c\/strong\u003e\u003cbr\u003eSelected by actual indoor-unit width, depth and required mounting clearance; water-collection construction with drain outlet; selected fit and seam performance pending\u003cbr\u003eCollect technician-generated runoff below and around the compatible unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Matched cover mounting\/support set\u003c\/strong\u003e\u003cbr\u003eAll brackets, clips, cords or elastic fittings required by the selected cover design; exact component count pending\u003cbr\u003eSupport the cover without relying on a missing accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Upper splash shield\u003c\/strong\u003e\u003cbr\u003eIntegrated upper section of a suitable full cover, or a separate compatible upper shield; confirm actual upper-wall and ceiling coverage\u003cbr\u003eLimit splash above the unit; a bottom-only open bag does not perform this role\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Compatible drain hose with outlet fittings and retaining clip\u003c\/strong\u003e\u003cbr\u003eTarget about 2.5-3 m; bore and adapter must match the cover outlet; exact supplied length and connection pending\u003cbr\u003eDirect collected wastewater into a stable receiving bucket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Waterproof work mat\u003c\/strong\u003e\u003cbr\u003eTarget about 1.8 x 2 m; impermeable backing; choose verified slip-resistant working surface and edge containment for the actual job\u003cbr\u003eProtect the floor below the work area and catch incidental drips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Wall-protection sheet\u003c\/strong\u003e\u003cbr\u003eTarget about 1.35 x 2.5 m; extend behind and below the unit; material suitable for temporary splash protection\u003cbr\u003eProtect wall finishes along the runoff\/splash route\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Pre-taped PE masking-film roll\u003c\/strong\u003e\u003cbr\u003eTarget 550 mm x 25 m for local shields; verify selected film and adhesive\u003cbr\u003eAdd local upper\/side shielding as required by the cover geometry\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Wide furniture-protection sheet\u003c\/strong\u003e\u003cbr\u003eSized to cover the nearby furniture and belongings; smooth water-resistant plastic barrier, not an absorbent dustsheet alone\u003cbr\u003eProtect surrounding belongings from splashes and dust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Low-tack protective tape roll\u003c\/strong\u003e\u003cbr\u003eTarget 48-50 mm x 25 m; surface-appropriate removable protective\/masking grade\u003cbr\u003eTemporarily secure protective material after a discreet surface test\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Approved plastic-film seam tape roll\u003c\/strong\u003e\u003cbr\u003eMoisture-resistant tape compatible with the chosen film; supplier-approved film-to-film overlaps; exact grade pending\u003cbr\u003eJoin protective film overlaps where required; do not apply strong sealing tape to delicate painted surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × Stable handled collection\/preparation buckets\u003c\/strong\u003e\u003cbr\u003eTarget 10 L each; clearly labelled Clean Water and Wastewater; stackable only if safely stable in use\u003cbr\u003eKeep clean water separate from collected wastewater and allow monitored collection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Flat bristle brush\u003c\/strong\u003e\u003cbr\u003eVerify non-metal bristle material and permitted use; do not assume safe on fins or coatings\u003cbr\u003eRemove loose dirt from manufacturer-approved accessible\/removable surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Soft non-metal detail brush\u003c\/strong\u003e\u003cbr\u003eNon-metal bristles; selected brush shape and softness to confirm before launch\u003cbr\u003eBrush manufacturer-approved accessible narrow details\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 × Colour-coded microfibre cloths\u003c\/strong\u003e\u003cbr\u003eSuggested split: 2 cleaning cloths and 2 dry finishing cloths; verify care instructions\u003cbr\u003eKeep dirty wiping separate from final drying\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × Absorbent finishing pads\u003c\/strong\u003e\u003cbr\u003eSuitable for clean-water incidental drips; compatible with any cleaner residue actually used\u003cbr\u003eHandle small drips during removal and final floor checks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 pair × Reusable cleaning gloves\u003c\/strong\u003e\u003cbr\u003eChoose material and thickness compatible with the selected cleaner SDS; one pair means two gloves\u003cbr\u003eProtect hands during the permitted cleaning and handling tasks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Liquid-splash goggles\u003c\/strong\u003e\u003cbr\u003eIndirect-vented splash-protection model; verify standard and fit for actual use; ordinary open safety spectacles are not the same protection\u003cbr\u003eProtect eyes from cleaning splashes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Splash apron\u003c\/strong\u003e\u003cbr\u003eReusable liquid-resistant material compatible with the job\u003cbr\u003eReduce wetting of clothing during handling and cleanup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 × Waste bags\u003c\/strong\u003e\u003cbr\u003eCorrect size for used disposable masking materials; not a wastewater container\u003cbr\u003eCollect dry\/appropriately handled used consumables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Washable storage bag\u003c\/strong\u003e\u003cbr\u003eSized after assembled-kit packing verification; store only clean dry reusable items\u003cbr\u003eKeep the coordinated tools together between jobs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1 × Illustrated fit, containment and finish checklist\u003c\/strong\u003e\u003cbr\u003eCover-fit diagram; masking-tape role; hose\/bucket setup; dry-off and tool-care checks; technician-only internal-work boundary\u003cbr\u003eHelp the buyer understand the full task and items needed separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eUseful add-ons for specific situations\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePlastic panel tools — For qualified technicians where the appliance manufacturer's disassembly procedure specifies them\u003c\/li\u003e\n\u003cli\u003eSpecialist wire brush — Only for a verified compatible non-delicate surface; keep away from aluminium fins, coils, washable mesh, plastic coatings and electronics\u003c\/li\u003e\n\u003cli\u003eLonger matched drain hose — For a longer measured route to a suitable receiving location; confirm outlet fit and keep the route unobstructed\u003c\/li\u003e\n\u003cli\u003eSpare masking-film and protective-tape rolls — Refills for repeated jobs; quantity consumed depends on room layout and masking area\u003c\/li\u003e\n\u003cli\u003eExtra drying cloths and absorbent pads — Additional finishing consumables for larger or wetter jobs\u003c\/li\u003e\n\u003cli\u003eStable access platform — Choose for the actual working height and load; not included in the proposed standard retail pack\u003c\/li\u003e\n\u003cli\u003eModel-specific electrical-component protective sheet — Technician-selected supplement where the service procedure requires it; does not make water exposure to electrical components safe\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHave ready at home\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModel-approved cleaner, if the manufacturer permits one; follow its label and SDS\u003c\/li\u003e\n\u003cli\u003eClean water at the appliance-manufacturer-approved temperature\u003c\/li\u003e\n\u003cli\u003eProfessional cleaning equipment and model-specific service tools selected by a qualified technician\u003c\/li\u003e\n\u003cli\u003eAny model-specific electrical-component protection required by the manufacturer’s service procedure, selected and provided by the qualified technician\u003c\/li\u003e\n\u003cli\u003eSafe electrical isolation and a stable access platform appropriate to the installation\u003c\/li\u003e\n\u003cli\u003eVacuum with suitable soft attachment if permitted and useful for loose-dust removal\u003c\/li\u003e\n\u003cli\u003eA suitable permitted wastewater disposal location and any cleaner-specific disposal arrangements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrom preparation to dry storage\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003ePrepare: Check the model instructions and job scope. The qualified technician isolates power and selects the permitted cleaning method. Move nearby belongings and measure cover fit and drainage route.\u003c\/li\u003e\n\u003cli\u003eProtect: Place the waterproof work mat, protect furniture and the wall, and provide actual upper-wall\/ceiling splash protection. Test the removable tape on a discreet clean dry area before securing masking materials. The technician protects or removes electrical components as the manufacturer’s service procedure requires before wet work.\u003c\/li\u003e\n\u003cli\u003eContain: Fit the cover with its matched supports. Connect and secure the drain hose into the labelled Wastewater bucket. Confirm the cover, overlaps, drain route and bucket setup before the permitted wet work starts.\u003c\/li\u003e\n\u003cli\u003eClean: Use the suitable brushes and cloths for approved surfaces. Internal washing remains a qualified technician task using the manufacturer's procedure and selected professional equipment.\u003c\/li\u003e\n\u003cli\u003eCollect: Keep clean and dirty water separate. Monitor bucket level and drainage throughout; stop if the containment arrangement leaks or runoff does not drain.\u003c\/li\u003e\n\u003cli\u003eFinish: Follow the model-specific drying and reassembly instructions. Remove the masking inward, handle drips, wipe the surrounding surfaces and leave the floor dry.\u003c\/li\u003e\n\u003cli\u003eStore: Clean and fully dry the reusable cover, hose, brushes, goggles and cloths according to their care instructions. Dispose of wastewater and consumables as applicable and store the clean dry kit together.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch2\u003eCheck the fit and material\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThis is a proposed complete-workflow BOM, not verified ready stock or a confirmed supplier-prepacked set. Contents, selected variants, quantities, dimensions and assembled packing must be confirmed before orders open.\u003c\/li\u003e\n\u003cli\u003eInternal heat-exchanger, fan and electrical-component work is for a qualified technician under the appliance manufacturer's procedure; this kit is not an instruction for a novice to open or pressure-wash the installed unit.\u003c\/li\u003e\n\u003cli\u003eThe kit does not include cleaner, pump, powered washer or other professional cleaning equipment.\u003c\/li\u003e\n\u003cli\u003eA bottom\/open-front wash cover does not automatically provide upper-wall or ceiling protection. Confirm the real upper shield or include separate masking.\u003c\/li\u003e\n\u003cli\u003eLow-tack protective tape secures masking material. It is not a guaranteed watertight seam or electrical-insulation system; low tack does not guarantee no paint damage.\u003c\/li\u003e\n\u003cli\u003eSome maintenance protection sheets are only splash\/dirt resistant and are explicitly unsuitable as washing covers. Verify the chosen product's actual intended use.\u003c\/li\u003e\n\u003cli\u003eFit depends on actual model dimensions, cover geometry and mounting clearance, not horsepower alone. Window-type, cassette and other formats require different containment systems.\u003c\/li\u003e\n\u003cli\u003eNot all filters are washable. Check the specific appliance manual; do not spray the installed electrical parts or assume brushes are suitable for delicate fins.\u003c\/li\u003e\n\u003cli\u003eNo universal fit, zero-leak guarantee, stain-removal result, disinfection claim, residue-free guarantee or verified cleaning-performance promise is made.\u003c\/li\u003e\n\u003cli\u003eDo not use the original styled photo as proof that the newly proposed protection items are supplied. New contents require verified packing and accurate product imagery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eKeep tools assigned to their task, wash them only as their care instructions allow, and dry reusable items before storage. Refill parts must match the supplied tool model, size and connector.\u003c\/p\u003e","brand":"Small Clean","offers":[{"title":"Default Title","offer_id":66775899439219,"sku":"SC-WF-001","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/5196\/5043\/files\/split-ac-complete-cleaning-and-protection-kit_490e84f8-ab56-4f30-ac6e-8aa94e8a77e0.png?v=1791089525","url":"https:\/\/neathelpers.com\/products\/split-ac-complete-cleaning-and-protection-kit","provider":"Small Clean","version":"1.0","type":"link"}