Split AC Complete Cleaning & Protection Kit

• Plastic panel tools — For qualified technicians where the appliance manufacturer's disassembly procedure specifies them
• Specialist wire brush — Only for a verified compatible non-delicate surface; keep away from aluminium fins, coils, washable mesh, plastic coatings and electronics
• Longer matched drain hose — For a longer measured route to a suitable receiving location; confirm outlet fit and keep the route unobstructed
• Spare masking-film and protective-tape rolls — Refills for repeated jobs; quantity consumed depends on room layout and masking area
• Extra drying cloths and absorbent pads — Additional finishing consumables for larger or wetter jobs
• Stable access platform — Choose for the actual working height and load; not included in the proposed standard retail pack
• Model-specific electrical-component protective sheet — Technician-selected supplement where the service procedure requires it; does not make water exposure to electrical components safe

• Model-approved cleaner, if the manufacturer permits one; follow its label and SDS
• Clean water at the appliance-manufacturer-approved temperature
• Professional cleaning equipment and model-specific service tools selected by a qualified technician
• Any model-specific electrical-component protection required by the manufacturer’s service procedure, selected and provided by the qualified technician
• Safe electrical isolation and a stable access platform appropriate to the installation
• Vacuum with suitable soft attachment if permitted and useful for loose-dust removal
• A suitable permitted wastewater disposal location and any cleaner-specific disposal arrangements

1. Prepare: Check the model instructions and job scope. The qualified technician isolates power and selects the permitted cleaning method. Move nearby belongings and measure cover fit and drainage route.
2. Protect: Place the waterproof work mat, protect furniture and the wall, and provide actual upper-wall/ceiling splash protection. Test the removable tape on a discreet clean dry area before securing masking materials. The technician protects or removes electrical components as the manufacturer’s service procedure requires before wet work.
3. Contain: Fit the cover with its matched supports. Connect and secure the drain hose into the labelled Wastewater bucket. Confirm the cover, overlaps, drain route and bucket setup before the permitted wet work starts.
4. Clean: Use the suitable brushes and cloths for approved surfaces. Internal washing remains a qualified technician task using the manufacturer's procedure and selected professional equipment.
5. Collect: Keep clean and dirty water separate. Monitor bucket level and drainage throughout; stop if the containment arrangement leaks or runoff does not drain.
6. Finish: Follow the model-specific drying and reassembly instructions. Remove the masking inward, handle drips, wipe the surrounding surfaces and leave the floor dry.
7. Store: Clean and fully dry the reusable cover, hose, brushes, goggles and cloths according to their care instructions. Dispose of wastewater and consumables as applicable and store the clean dry kit together.

• This is a proposed complete-workflow BOM, not verified ready stock or a confirmed supplier-prepacked set. Contents, selected variants, quantities, dimensions and assembled packing must be confirmed before orders open.
• Internal heat-exchanger, fan and electrical-component work is for a qualified technician under the appliance manufacturer's procedure; this kit is not an instruction for a novice to open or pressure-wash the installed unit.
• The kit does not include cleaner, pump, powered washer or other professional cleaning equipment.
• A bottom/open-front wash cover does not automatically provide upper-wall or ceiling protection. Confirm the real upper shield or include separate masking.
• Low-tack protective tape secures masking material. It is not a guaranteed watertight seam or electrical-insulation system; low tack does not guarantee no paint damage.
• Some maintenance protection sheets are only splash/dirt resistant and are explicitly unsuitable as washing covers. Verify the chosen product's actual intended use.
• Fit depends on actual model dimensions, cover geometry and mounting clearance, not horsepower alone. Window-type, cassette and other formats require different containment systems.
• Not all filters are washable. Check the specific appliance manual; do not spray the installed electrical parts or assume brushes are suitable for delicate fins.
• No universal fit, zero-leak guarantee, stain-removal result, disinfection claim, residue-free guarantee or verified cleaning-performance promise is made.
• Do not use the original styled photo as proof that the newly proposed protection items are supplied. New contents require verified packing and accurate product imagery.

Keep tools assigned to their task, wash them only as their care instructions allow, and dry reusable items before storage. Refill parts must match the supplied tool model, size and connector.